Lighting CalculatorPlan light with clear assumptions

Lighting calculators / Energy & project costs

Plan the light. Understand the numbers.

Lighting Project Budget Calculator

A project budget should separate fixture price, installation labor and additional work such as controls, wiring or access equipment. Enter verified quotes rather than assuming that a generic online unit price includes every site condition. A contingency is a chosen planning allowance, not an estimate of unknown code or permit requirements.

Your lighting inputs

fixtures
currency
currency
currency
%

Starting values are illustrative. Check units and assumptions below. Calculate submits your inputs to this site’s result page.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Base cost = count × (fixture price + labor per fixture) + other costs; budget = base × (1 + contingency/100).

Build a transparent preliminary lighting budget from supplied quotes and a chosen contingency.

  1. Choose a measurement plane and use compatible units for all inputs.
  2. Obtain appropriate product data or representative measurements for the stated model.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Prices are illustrative and do not represent local contractor quotations, permits, taxes or a guaranteed project total.

Lighting budget worksheets and landscape project costs

A project budget should separate fixture price, installation labor and additional work such as controls, wiring or access equipment. Enter verified quotes rather than assuming that a generic online unit price includes every site condition. A contingency is a chosen planning allowance, not an estimate of unknown code or permit requirements.

The same worksheet can organize a landscape lighting quote or a room upgrade if the per-fixture assumptions are suitable. It does not estimate trenching lengths, transformer compatibility or local labor rates. The output can be copied into a planning worksheet, but it is not a formal bid or construction estimate.

Check the numbers

Lighting Project Budget Calculator: calculated examples

These are computed scenarios using the same server calculation as the form. They are not manufacturer ratings or prescribed design values.

Worked example with stated inputs

Luminaires to install = 10 fixtures; Price per luminaire = 80 currency; Installation labor per luminaire = 40 currency; Other project costs = 200 currency; Chosen contingency = 10 %.

OutputComputed result
Budget with chosen contingency1,540 currency
Base supplied costs1,400 currency
Contingency amount140 currency

How one input changes the answer

ScenarioChanged inputResult
2 fixturesLuminaires to install484 currency
5 fixturesLuminaires to install880 currency
8 fixturesLuminaires to install1,276 currency
10 fixturesLuminaires to install1,540 currency
15 fixturesLuminaires to install2,200 currency
20 fixturesLuminaires to install2,860 currency
30 fixturesLuminaires to install4,180 currency

Unchanged inputs use: Luminaires to install = 10 fixtures; Price per luminaire = 80 currency; Installation labor per luminaire = 40 currency; Other project costs = 200 currency; Chosen contingency = 10 %. Results retain the model limitations described above.

Common questions

Does this provide local installation prices?

No. You enter the fixture, labor and other cost figures.

Is contingency a tax?

No. It is an explicit planning percentage on the entered base cost.

Can I model fixtures with different prices?

Calculate groups separately or use a properly weighted average, keeping labor and other costs consistent.

Does a low budget confirm a viable lighting design?

No. Photometric, electrical and installation requirements still need to be established.

Which assumptions should I check?

Match the units, measurement plane and equipment boundary stated on this page. The starting values and comparison cases are chosen examples, not universal recommendations or current manufacturer ratings.

Where are the formula references?

Published references are listed at the bottom of this page as plain-text website addresses. The example tables are calculated from the displayed method rather than copied from proprietary tables.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, current tariffs or proprietary test results.

  • Virginia Cooperative Extension: Estimating Appliance and Home Electronic Energy Usehttps://www.pubs.ext.vt.edu/2901/2901-9014/2901-9014.html