Lighting CalculatorPlan light with clear assumptions

Lighting calculators / Energy & project costs

Plan the light. Understand the numbers.

LED Lighting Savings & Payback Calculator

Compare actual full-product inputs for an existing and proposed lighting system with equivalent useful service. A watt reduction is not a fair efficiency improvement if the new system also supplies too little light. Confirm lumens, distribution, color quality and operating schedule before interpreting the annual money difference.

Your lighting inputs

W
W
lamps
h/year
currency/kWh
currency

Starting values are illustrative. Check units and assumptions below. Calculate submits your inputs to this site’s result page.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Annual savings = (old W − new W) × count × annual hours ÷ 1,000 × rate; payback = installed cost ÷ positive savings.

Compare annual lighting electricity use and calculate a simple energy-only payback.

  1. Choose a measurement plane and use compatible units for all inputs.
  2. Obtain appropriate product data or representative measurements for the stated model.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Use comparable delivered lighting service. Maintenance, rebates, financing and future tariff changes are excluded; simple payback is not a discounted ROI.

LED versus fluorescent, halogen and incandescent energy savings

Compare actual full-product inputs for an existing and proposed lighting system with equivalent useful service. A watt reduction is not a fair efficiency improvement if the new system also supplies too little light. Confirm lumens, distribution, color quality and operating schedule before interpreting the annual money difference.

For T12 fluorescent, metal halide or halogen replacement, include ballast or driver input in the electrical boundary. Brand or program searches such as BPA, Bonneville, Bell, SEAI or PSE do not mean this tool reproduces their current incentive or approval rules. Enter a verified installed quote; any rebate must be assessed separately.

Check the numbers

LED Lighting Savings & Payback Calculator: calculated examples

These are computed scenarios using the same server calculation as the form. They are not manufacturer ratings or prescribed design values.

Worked example with stated inputs

Existing full-lamp input = 60 W; Replacement full-lamp input = 9 W; Lamp replacements = 10 lamps; Annual operating hours = 1460 h/year; Electricity price = 0.2 currency/kWh; Total installed upgrade cost = 100 currency.

OutputComputed result
Annual electricity savings148.92 currency/year
Annual energy reduction744.6 kWh/year
Simple payback0.671501 years

How one input changes the answer

ScenarioChanged inputResult
365 h/yearAnnual operating hours37.23 currency/year
730 h/yearAnnual operating hours74.46 currency/year
1095 h/yearAnnual operating hours111.69 currency/year
1460 h/yearAnnual operating hours148.92 currency/year
2190 h/yearAnnual operating hours223.38 currency/year
2920 h/yearAnnual operating hours297.84 currency/year
4380 h/yearAnnual operating hours446.76 currency/year

Unchanged inputs use: Existing full-lamp input = 60 W; Replacement full-lamp input = 9 W; Lamp replacements = 10 lamps; Annual operating hours = 1460 h/year; Electricity price = 0.2 currency/kWh; Total installed upgrade cost = 100 currency. Results retain the model limitations described above.

Common questions

Is this a lighting ROI calculator?

It reports annual energy savings and simple payback, not a discounted rate of return or full lifecycle ROI.

What if the replacement uses more watts?

Savings are negative, and there is no positive energy-only payback under these inputs.

Can I include maintenance savings?

They are not an input in this model. Compare them separately to avoid implying an unmodeled benefit.

Does this determine an LED rebate?

No. Program rules and eligibility must be checked with the current program administrator.

Which assumptions should I check?

Match the units, measurement plane and equipment boundary stated on this page. The starting values and comparison cases are chosen examples, not universal recommendations or current manufacturer ratings.

Where are the formula references?

Published references are listed at the bottom of this page as plain-text website addresses. The example tables are calculated from the displayed method rather than copied from proprietary tables.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, current tariffs or proprietary test results.

  • Virginia Cooperative Extension: Estimating Appliance and Home Electronic Energy Usehttps://www.pubs.ext.vt.edu/2901/2901-9014/2901-9014.html
  • US Federal Trade Commission: Shopping for Light Bulbs; lumens versus input wattshttps://consumer.ftc.gov/articles/shopping-light-bulbs