Lighting CalculatorPlan light with clear assumptions

Lighting calculators / Energy & project costs

Plan the light. Understand the numbers.

Light Bulb Running Cost Calculator

A lamp rated as a 60 W replacement may draw 9 W. Use its actual input for electricity cost. Ten 9 W lamps used four hours per day consume 0.36 kWh/day. The cost follows from the entered tariff, not from an assumed national average.

Your lighting inputs

W
lamps
h/day
days
currency/kWh

Starting values are illustrative. Check units and assumptions below. Calculate submits your inputs to this site’s result page.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Period kWh = lamp W × count × hours/day × days ÷ 1,000; cost = kWh × unit rate.

Price the electricity used by a group of lamps on a stated daily schedule.

  1. Choose a measurement plane and use compatible units for all inputs.
  2. Obtain appropriate product data or representative measurements for the stated model.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Use actual complete-product input, not a brightness-equivalent wattage. Fixed household charges and taxes are not added.

Lighting electricity bills and LED bulb running costs

A lamp rated as a 60 W replacement may draw 9 W. Use its actual input for electricity cost. Ten 9 W lamps used four hours per day consume 0.36 kWh/day. The cost follows from the entered tariff, not from an assumed national average.

For UK running costs, convert pence to pounds before entering the rate; the same rule applies to cents and dollars elsewhere. Controls and dimming can change average input and on-time. If a dimmed group is measured at the wall, do not apply a second unverified efficiency reduction.

Check the numbers

Light Bulb Running Cost Calculator: calculated examples

These are computed scenarios using the same server calculation as the form. They are not manufacturer ratings or prescribed design values.

Worked example with stated inputs

Complete lamp input = 9 W; Identical lamps = 10 lamps; Operating hours per day = 4 h/day; Days in period = 30 days; Electricity price = 0.2 currency/kWh.

OutputComputed result
Period lighting energy cost2.16 currency
Daily electricity0.36 kWh/day
Period electricity10.8 kWh
365-day constant-schedule cost26.28 currency/year

How one input changes the answer

ScenarioChanged inputResult
2.25 WComplete lamp input0.54 currency
4.5 WComplete lamp input1.08 currency
6.75 WComplete lamp input1.62 currency
9 WComplete lamp input2.16 currency
13.5 WComplete lamp input3.24 currency
18 WComplete lamp input4.32 currency
27 WComplete lamp input6.48 currency

Unchanged inputs use: Complete lamp input = 9 W; Identical lamps = 10 lamps; Operating hours per day = 4 h/day; Days in period = 30 days; Electricity price = 0.2 currency/kWh. Results retain the model limitations described above.

Common questions

Does a 60 W equivalent LED use 60 W?

No. Check its actual input wattage. Equivalent wattage usually describes a brightness comparison.

Can I use pounds, dollars or another currency?

Yes, when the rate uses whole units of that same currency per kWh. This tool does not convert currencies.

How do I estimate annual lighting cost?

Use 365 days and a representative daily schedule, or add seasonal schedules separately.

Does the calculation include a lighting rebate?

No. There is no current rebate eligibility or incentive database.

Which assumptions should I check?

Match the units, measurement plane and equipment boundary stated on this page. The starting values and comparison cases are chosen examples, not universal recommendations or current manufacturer ratings.

Where are the formula references?

Published references are listed at the bottom of this page as plain-text website addresses. The example tables are calculated from the displayed method rather than copied from proprietary tables.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, current tariffs or proprietary test results.

  • Virginia Cooperative Extension: Estimating Appliance and Home Electronic Energy Usehttps://www.pubs.ext.vt.edu/2901/2901-9014/2901-9014.html
  • US Federal Trade Commission: Shopping for Light Bulbs; lumens versus input wattshttps://consumer.ftc.gov/articles/shopping-light-bulbs