Lighting CalculatorPlan light with clear assumptions

Lighting calculators / Light & unit conversions

Plan the light. Understand the numbers.

Lighting Efficacy Calculator

A full luminaire delivering 1,800 lm while drawing 18 W has an efficacy of 100 lm/W at those conditions. The electrical measurement should include its driver, and the output should describe the complete fixture. Mixing bare-chip output with wall-input watts can create an inconsistent comparison.

Your lighting inputs

lm
W

Starting values are illustrative. Check units and assumptions below. Calculate submits your inputs to this site’s result page.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Electrical luminous efficacy = full-product lumens ÷ electrical input watts.

Calculate lumens per watt from matching output and electrical input measurements.

  1. Choose a measurement plane and use compatible units for all inputs.
  2. Obtain appropriate product data or representative measurements for the stated model.
  3. Submit the form, then interpret the result with the assumptions and limits below.

This is efficacy, not a percentage efficiency. Optical luminous efficacy of radiation and LED chip ratings use different boundaries.

Lumens per watt and LED luminous efficiency terminology

A full luminaire delivering 1,800 lm while drawing 18 W has an efficacy of 100 lm/W at those conditions. The electrical measurement should include its driver, and the output should describe the complete fixture. Mixing bare-chip output with wall-input watts can create an inconsistent comparison.

Higher efficacy means more photopically weighted flux per input watt, not necessarily better visual quality or better light placement. Spectrum, glare, color rendering and distribution also matter. The 683 lm/W photometric reference relates to a particular monochromatic radiation condition and is not a generic LED wall-plug efficacy.

Check the numbers

Lighting Efficacy Calculator: calculated examples

These are computed scenarios using the same server calculation as the form. They are not manufacturer ratings or prescribed design values.

Worked example with stated inputs

Measured full-product output = 1800 lm; Measured electrical input = 18 W.

OutputComputed result
Full-product electrical luminous efficacy100 lm/W

How one input changes the answer

ScenarioChanged inputResult
450 lmMeasured full-product output25 lm/W
900 lmMeasured full-product output50 lm/W
1350 lmMeasured full-product output75 lm/W
1800 lmMeasured full-product output100 lm/W
2700 lmMeasured full-product output150 lm/W
3600 lmMeasured full-product output200 lm/W
5400 lmMeasured full-product output300 lm/W

Unchanged inputs use: Measured full-product output = 1800 lm; Measured electrical input = 18 W. Results retain the model limitations described above.

Common questions

Is lm/W a percentage?

No. It is luminous efficacy with units of lumens per watt.

Can I compare two luminaires using this?

Use matching measurement boundaries and operating conditions, and separately compare light quality and distribution.

Does dimming preserve the same efficacy?

Not necessarily. Use measurements or product data for the dimmed state.

Can I calculate lumens if I know efficacy and watts?

Yes. Multiply watts by lm/W using the lumens-and-watts calculator.

Which assumptions should I check?

Match the units, measurement plane and equipment boundary stated on this page. The starting values and comparison cases are chosen examples, not universal recommendations or current manufacturer ratings.

Where are the formula references?

Published references are listed at the bottom of this page as plain-text website addresses. The example tables are calculated from the displayed method rather than copied from proprietary tables.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, current tariffs or proprietary test results.

  • US Federal Trade Commission: Shopping for Light Bulbs; lumens versus input wattshttps://consumer.ftc.gov/articles/shopping-light-bulbs
  • NIST: Realization of the candela and photometric spectral weightinghttps://www.nist.gov/pml/sensor-science/optical-radiation/realization-candela